🚚 Free Worldwide Shipping on All Orders!Shop Now
Beast Power Rack — Commercial 75×75×3mm Power Cage
In Stock, Sydney Warehouse
🏋️ On Display, Milperra Showroom
🔧 Sydney Metro Installation Available
🚚 Fast Australia-Wide Freight
Beast Power Rack Commercial 75×75×3mm Power Cage | 500kg+ Rated | Home Gym & PT Studio | Australia
The Beast Power Rack earns its name. Built from 75×75×3mm steel uprights, the same wall thickness used in standalone commercial gym machines and substantially heavier than the 50×50mm tubing found in most home gym racks, this is a power rack built for serious load. Standing 235cm tall with a 119cm outer width and 150cm deep flat-foot base, it is rated for 500kg+ across J-hooks and spotter arms and ships complete with a multi-grip pull-up station, J-hooks and safety spotter arms.
Whether you are building a garage gym, equipping a PT studio, or fitting out a commercial facility, the Beast Power Rack delivers the rigidity and safety margins serious lifting demands, backed by a matte black powder coat finish and available across Sydney, Melbourne, Brisbane, Adelaide and Perth.
500KG+Load Rating
75×75×3mmSteel Uprights
235CMTotal Height
50MMHole Spacing
Why 75×75×3mm Changes Everything
3×
More Steel
75×75×3mm uprights contain significantly more steel per metre than standard 50×50×2mm home rack tubing, the difference you feel the moment you load the bar
500KG+
Rated Capacity
J-hooks and spotter arms rated for 500kg+, handling heavy squats, bench press and overhead press without frame flex or rack movement
0
Wobble
The combination of 3mm wall thickness, flat-foot base design and crossbeam bracing minimises the rack movement that compromises safety and confidence under heavy load
What makes the Beast Power Rack different from budget power racks?
Standard home gym racks use 50×50×2mm steel tubing. The Beast Power Rack uses 75×75×3mm, a notably larger upright cross-section and thicker wall. This is not a cosmetic upgrade: thicker tube walls resist deflection under eccentric loading, which is a critical safety factor when failing a heavy squat or bench press without a spotter. The laser-cut numbered holes at 50mm spacing support precise, repeatable J-hook positioning rather than the guesswork common to cheaper racks.
Dimensions at a Glance
Standard home gym racks use 50×50×2mm steel tubing. The Beast Power Rack uses 75×75×3mm, a notably larger upright cross-section and thicker wall. This is not a cosmetic upgrade: thicker tube walls resist deflection under eccentric loading, which is a critical safety factor when failing a heavy squat or bench press without a spotter. The laser-cut numbered holes at 50mm spacing support precise, repeatable J-hook positioning rather than the guesswork common to cheaper racks.
Know Your Footprint
235cmTotal Height
119cmOuter Width
103cmInner Width
150cmBase Depth
Recommended space: Allow a minimum 2.5m × 2.5m floor area for safe training access and barbell loading on both sides. Minimum ceiling height of 2.4m, which standard Australian residential ceilings comfortably meet. Contact our team for layout advice before ordering.
Key FeaturesCommercial Grade From Base to Bar
75×75×3mm Commercial Steel Uprights3mm wall thickness throughout, the same specification used in standalone commercial power racks. Provides high rigidity under heavy compound loads.
Laser-Cut Numbered Holes, 50mm SpacingPrecision laser-cut height positions with numbered markings for fast, repeatable J-hook and spotter arm adjustments, no guesswork between sets or training partners.
Multi-Grip Pull-Up StationIntegrated overhead pull-up bar with wide, narrow and neutral grip positions, covering lat pulldowns, chin-ups, hanging core work and upper-body mobility drills.
Heavy-Duty J-Hooks & Spotter ArmsRated for 500kg+ loads. J-hook cradle design with protective lining guards your barbell's knurling. Spotter arms catch failed reps safely across the full rack depth.
Flat-Foot Self-Stabilising BaseA wide 150cm deep flat-foot base provides freestanding stability without bolting to the floor, a key benefit for garage gyms, rented spaces and PT studios.
Floor Bolt-Down ReadyUpright feet include bolt holes for permanent floor anchoring, recommended for commercial environments, kipping pull-up work and heavy CrossFit-style training.
Matte Black Powder Coat FinishA scratch, sweat and corrosion-resistant finish built to withstand daily multi-user commercial gym use without chipping, fading or surface degradation.
Modular Attachment Compatibility75×75mm uprights with 28mm holes accept a full range of rack attachments, dip handles, landmine, band pegs, plate storage and more to expand training capability over time.
Full Exercise Library
Squat Variations
- Barbell back squat (high & low bar)
- Front squat
- Box squat
- Pause squat
- Rack pull (partial deadlift)
Pressing Movements
- Barbell bench press (flat, incline)
- Overhead barbell press (standing & seated)
- Close grip bench press
- Floor press
- Pin press
Pull-Up Station
- Wide grip pull-up
- Chin-up (supinated grip)
- Neutral grip pull-up
- Hanging leg & knee raise
- L-sit hold
Posterior Chain
- Romanian deadlift (rack loaded)
- Rack pull (knee height)
- Good morning
- Barbell hip thrust (spotter arms)
- Barbell shrug
Accessory Work
- Barbell row (J-hooks loaded)
- Z-press (seated overhead)
- Landmine press (with attachment)
- Dips (with dip handle attachment)
- Band work (with band peg attachments)
Strength & Power
- Isometric mid-shin pull
- Paused squats & paused bench
- Block deadlifts (plates elevated)
- Reverse band squat & bench
- Heavy singles & max effort work
Technical Details
| Frame Steel | 75×75×3mm commercial-grade steel uprights |
| Total Height | 235cm |
| Outer Width | 119cm |
| Inner Width (usable) | 103cm |
| Base Depth | 150cm |
| Hole Spacing | 50mm, laser-cut with numbered positions |
| Pull-Up Station | Integrated multi-grip bar, wide, narrow and neutral grip |
| Included Safety | J-hooks (pair) and adjustable spotter arms (pair) |
| Base Style | Flat-foot freestanding, bolt-down holes included |
| Finish | Matte black powder coat, scratch, sweat and corrosion resistant |
| Attachment Compatibility | 75×75mm uprights, 28mm holes, compatible with modular rack attachments |
| Warranty | To confirm |
| Delivery | Australia-wide palletised freight, Sydney, Melbourne, Brisbane, Adelaide, Perth |
Weight Ratings at a Glance
| Component | Rated Capacity | Notes |
|---|---|---|
| J-Hooks | 500kg+ | Heavy squat, bench press and overhead press |
| Spotter Arms | 500kg+ | Full-width catch depth across inner rack space |
| Pull-Up Bar | 160kg | Multi-grip integrated overhead station |
| Frame Uprights | Commercial rated | 75×75×3mm, the same spec used in standalone commercial racks |
Pros & Cons
✓ Pros
- 75×75×3mm commercial steel frame, the same wall thickness used in standalone commercial racks
- 500kg+ rated J-hooks and spotter arms for serious strength training
- 235cm height accommodates tall lifters and overhead bar work comfortably
- Laser-cut numbered holes at 50mm spacing for fast, precise height adjustment
- Multi-grip pull-up station included as standard
- Flat-foot base offers freestanding stability without mandatory floor bolting
- Bolt-down holes included for permanent commercial installation
- Matte black powder coat resists scratches, sweat and corrosion
- On display at our Milperra Sydney showroom, inspect before you buy
✗ Cons
- Heavy freight unit, check delivery access and floor load for upper-level installations
- Requires 2.4m minimum ceiling height, check for fans, lights and overhead obstacles
- Assembly requires 2 people and around 2 to 3 hours for first-time assembly
- For kipping pull-ups and CrossFit-style use, floor bolting is strongly recommended
- Not suitable for outdoor or uncovered environments
The Right Rack For
- Serious home gym and garage gym liftersCommercial 75×75×3mm steel means this rack is built to outlast every program you run through it, in a footprint suited to a standard garage bay
- Powerlifters and strength athletes500kg+ rated J-hooks and spotter arms, laser-cut numbered holes for competition-height setup, and high rigidity under max effort attempts
- PT studios and small commercial facilitiesMulti-grip pull-up station, bolt-down capability and modular attachment compatibility cover a wide range of client lifting styles
- Anyone upgrading from a 50×50mm budget rackThe difference in rigidity and confidence under load is noticeable from the first heavy session
- School gyms, hotel fitness centres and institutional facilitiesCommercial-grade build suited to sustained daily multi-user heavy use
Who should not buy this: If you have a low ceiling under 2.4m, the Beast Power Rack's 235cm height will not fit comfortably. If you only need a basic squat stand for light accessory work, a smaller and lighter rack will suit your space and budget better. If you need a fully modular cable and pulley system in one unit rather than a dedicated rack, a functional trainer may be a better starting point.
See It in Sydney
Beast Power Rack On Display
10/202 Milperra Road, Milperra NSW 2214. Inspect the frame, load the J-hooks, feel the steel weight and compare with other rack models in person before purchasing.
📍 Get Directions
Showroom Hours
Monday to Friday, 9am to 5pm. Saturday by appointment only. Closed Sunday.
Our team is on-site for layout planning, ceiling height assessment and attachment configuration advice.
Sydney Metro Installation
Professional assembly available for Sydney customers. The rack is assembled, levelled and safety checked, ready to train the same day. Contact us to book after ordering.
Australia-Wide FreightTracked palletised heavy freight to Sydney, Melbourne, Brisbane, Adelaide, Perth and regional areas. Tail-lift delivery available for residential addresses.
Depot Pickup AvailableSydney (Milperra NSW), Melbourne (Derrimut) and Brisbane (Archerfield) depots. Contact us to arrange collection.
Professional InstallationSydney Metro installation available, train the same day. Contact us after ordering to book your assembly slot.
Frequently Bought Together
🏋️ Power Racks & Squat Racks →
⚫ Dumbbells & Racks →
🔩 Rack & Machine Attachments →
🟫 Rubber Gym Flooring →
Frequently Asked Questions
Common Questions
It refers to the upright steel tubing dimensions, 75mm wide × 75mm deep × 3mm wall thickness. Standard home gym racks use 50×50×2mm tubing. The Beast Power Rack's uprights have a noticeably larger cross-section and thicker wall. In practical terms, thicker walls resist deflection under eccentric loading, the force generated when a heavy barbell is lowered, caught by spotter arms, or racked unevenly. This is a key safety factor during heavy squats and bench press without a spotter. Thicker uprights also support heavier J-hook and attachment ratings, which is why the Beast Power Rack is rated at 500kg+.
The Beast Power Rack's flat-foot base design provides freestanding stability for standard barbell training, squats, bench press, overhead press and deadlifts, without floor anchoring. However, bolt-down holes are included in the upright feet for permanent installation. Floor bolting is strongly recommended for commercial environments, kipping pull-ups, heavy band-resisted work, or any training style that generates lateral or horizontal force on the frame. For Sydney Metro customers, our installation team can advise on the best anchoring method for your floor type.
The Beast Power Rack measures 119cm wide × 150cm deep × 235cm tall. For comfortable training with full barbell loading on both sides, allow a minimum 2.5m × 2.5m floor area. Standard Australian residential ceilings at 2.4m are sufficient, but check for overhead fans, light fittings and air conditioning units. A standard single-car garage bay (typically 2.8 to 3m wide) accommodates the rack width comfortably. Contact us with your exact room dimensions and our team will advise on the ideal placement.
The Beast Power Rack ships complete with:
- Pair of commercial J-hooks with barbell protection lining
- Pair of adjustable safety spotter arms
- Integrated multi-grip pull-up bar (wide, narrow and neutral grip)
- Full assembly hardware and instructions
Yes. The Beast Power Rack is built to commercial specification. The 75×75×3mm frame is the same upright standard used in purpose-built commercial power racks. The 500kg+ rated J-hooks and spotter arms support repeated heavy loading across multiple daily users. The matte black powder coat resists sweat, chalk and surface abrasion under commercial use conditions. The optional floor bolt-down capability supports full stability in high-traffic environments. For multi-unit commercial fitouts, contact us for volume pricing and delivery coordination.
Yes. The Beast Power Rack uses 75×75mm uprights with 28mm pin holes, a commercial standard that accepts a wide range of modular attachments. Compatible upgrades include dip handles, a landmine base, safety strap systems, band peg sets, plate storage pegs, chin-up ball grips and front foot extensions for additional stability. This modular compatibility means your rack can grow with your training without needing to replace the unit.
Assembly requires 2 people and approximately 2 to 3 hours following the included instructions. All components are labelled and the process is straightforward for anyone comfortable with flat-pack furniture assembly. For Sydney Metro customers, professional installation is available, our team assembles, levels and safety checks the rack ready to train the same day. Contact us after ordering to book. For interstate customers, detailed assembly instructions and pre-labelled components are included with every order.
Yes. The Beast Power Rack is on display at our Milperra Sydney showroom at 10/202 Milperra Road, Milperra NSW 2214. You can inspect the steel uprights, test the J-hook adjustment, feel the frame rigidity and compare it against other rack models we stock. Showroom hours are Monday to Friday, 9am to 5pm, and Saturday by appointment only. Our team is on-site to answer questions about ceiling height requirements, floor anchoring options and attachment compatibility for your specific setup.
It depends on what you need from a rack. Budget imported racks typically use 50×50×2mm steel and lighter-rated hardware, which is fine for casual lifting at lower weights. The Beast Power Rack's 75×75×3mm frame and 500kg+ rated J-hooks and spotter arms are built for lifters who train heavy, train often, or need a rack that will hold up under commercial multi-user conditions. If you are an occasional lifter working with lighter loads, a lighter rack may be a more cost-effective choice. If you train seriously or run a facility, the extra steel pays off in rigidity and longevity.
Warranty details for the Beast Power Rack are to be confirmed. Contact our team on 1300 247 888 or [email protected] and we will provide current warranty terms before you order.
The rack arrives flat-packed via palletised freight and requires assembly, which takes around 2 to 3 hours with 2 people following the included instructions. If you are in the Sydney Metro area, you can book our professional installation service so the rack arrives, is assembled, levelled and safety checked on the day, ready to train immediately. Interstate customers receive full assembly instructions and labelled hardware with every order.
The rack ships with everything needed to start training: J-hooks, spotter arms and the multi-grip pull-up bar. You will need your own Olympic barbell and weight plates, which are sold separately. Many customers also add a flat or adjustable bench for pressing work, and rubber gym flooring underneath the rack to protect both the floor and equipment. Browse our dumbbells and racks and rubber gym flooring ranges to complete your setup.
Beast Power Rack: Delivery Areas Australia
We deliver the Beast Power Rack Australia-wide, with regular freight to Sydney and across New South Wales including Parramatta, Bankstown, Liverpool, Penrith, Blacktown, Campbelltown, the Northern Beaches and Wollongong. We also service Melbourne and regional Victoria, Brisbane, the Gold Coast and Sunshine Coast in Queensland, Adelaide and South Australia, Perth and Western Australia, Canberra, Hobart and Darwin. Sydney Metro customers can also arrange professional installation, and depot pickup is available at our Milperra showroom.
We deliver the Beast Power Rack Australia-wide, with regular freight to Sydney and across New South Wales including Parramatta, Bankstown, Liverpool, Penrith, Blacktown, Campbelltown, the Northern Beaches and Wollongong. We also service Melbourne and regional Victoria, Brisbane, the Gold Coast and Sunshine Coast in Queensland, Adelaide and South Australia, Perth and Western Australia, Canberra, Hobart and Darwin. Sydney Metro customers can also arrange professional installation, and depot pickup is available at our Milperra showroom.
$208.01
Original: $693.36
-70%Beast Power Rack — Commercial 75×75×3mm Power Cage—
$693.36
$208.01More Images
Beast Power Rack — Commercial 75×75×3mm Power Cage
In Stock, Sydney Warehouse
🏋️ On Display, Milperra Showroom
🔧 Sydney Metro Installation Available
🚚 Fast Australia-Wide Freight
Beast Power Rack Commercial 75×75×3mm Power Cage | 500kg+ Rated | Home Gym & PT Studio | Australia
The Beast Power Rack earns its name. Built from 75×75×3mm steel uprights, the same wall thickness used in standalone commercial gym machines and substantially heavier than the 50×50mm tubing found in most home gym racks, this is a power rack built for serious load. Standing 235cm tall with a 119cm outer width and 150cm deep flat-foot base, it is rated for 500kg+ across J-hooks and spotter arms and ships complete with a multi-grip pull-up station, J-hooks and safety spotter arms.
Whether you are building a garage gym, equipping a PT studio, or fitting out a commercial facility, the Beast Power Rack delivers the rigidity and safety margins serious lifting demands, backed by a matte black powder coat finish and available across Sydney, Melbourne, Brisbane, Adelaide and Perth.
500KG+Load Rating
75×75×3mmSteel Uprights
235CMTotal Height
50MMHole Spacing
Why 75×75×3mm Changes Everything
3×
More Steel
75×75×3mm uprights contain significantly more steel per metre than standard 50×50×2mm home rack tubing, the difference you feel the moment you load the bar
500KG+
Rated Capacity
J-hooks and spotter arms rated for 500kg+, handling heavy squats, bench press and overhead press without frame flex or rack movement
0
Wobble
The combination of 3mm wall thickness, flat-foot base design and crossbeam bracing minimises the rack movement that compromises safety and confidence under heavy load
What makes the Beast Power Rack different from budget power racks?
Standard home gym racks use 50×50×2mm steel tubing. The Beast Power Rack uses 75×75×3mm, a notably larger upright cross-section and thicker wall. This is not a cosmetic upgrade: thicker tube walls resist deflection under eccentric loading, which is a critical safety factor when failing a heavy squat or bench press without a spotter. The laser-cut numbered holes at 50mm spacing support precise, repeatable J-hook positioning rather than the guesswork common to cheaper racks.
Dimensions at a Glance
Standard home gym racks use 50×50×2mm steel tubing. The Beast Power Rack uses 75×75×3mm, a notably larger upright cross-section and thicker wall. This is not a cosmetic upgrade: thicker tube walls resist deflection under eccentric loading, which is a critical safety factor when failing a heavy squat or bench press without a spotter. The laser-cut numbered holes at 50mm spacing support precise, repeatable J-hook positioning rather than the guesswork common to cheaper racks.
Know Your Footprint
235cmTotal Height
119cmOuter Width
103cmInner Width
150cmBase Depth
Recommended space: Allow a minimum 2.5m × 2.5m floor area for safe training access and barbell loading on both sides. Minimum ceiling height of 2.4m, which standard Australian residential ceilings comfortably meet. Contact our team for layout advice before ordering.
Key FeaturesCommercial Grade From Base to Bar
75×75×3mm Commercial Steel Uprights3mm wall thickness throughout, the same specification used in standalone commercial power racks. Provides high rigidity under heavy compound loads.
Laser-Cut Numbered Holes, 50mm SpacingPrecision laser-cut height positions with numbered markings for fast, repeatable J-hook and spotter arm adjustments, no guesswork between sets or training partners.
Multi-Grip Pull-Up StationIntegrated overhead pull-up bar with wide, narrow and neutral grip positions, covering lat pulldowns, chin-ups, hanging core work and upper-body mobility drills.
Heavy-Duty J-Hooks & Spotter ArmsRated for 500kg+ loads. J-hook cradle design with protective lining guards your barbell's knurling. Spotter arms catch failed reps safely across the full rack depth.
Flat-Foot Self-Stabilising BaseA wide 150cm deep flat-foot base provides freestanding stability without bolting to the floor, a key benefit for garage gyms, rented spaces and PT studios.
Floor Bolt-Down ReadyUpright feet include bolt holes for permanent floor anchoring, recommended for commercial environments, kipping pull-up work and heavy CrossFit-style training.
Matte Black Powder Coat FinishA scratch, sweat and corrosion-resistant finish built to withstand daily multi-user commercial gym use without chipping, fading or surface degradation.
Modular Attachment Compatibility75×75mm uprights with 28mm holes accept a full range of rack attachments, dip handles, landmine, band pegs, plate storage and more to expand training capability over time.
Full Exercise Library
Squat Variations
- Barbell back squat (high & low bar)
- Front squat
- Box squat
- Pause squat
- Rack pull (partial deadlift)
Pressing Movements
- Barbell bench press (flat, incline)
- Overhead barbell press (standing & seated)
- Close grip bench press
- Floor press
- Pin press
Pull-Up Station
- Wide grip pull-up
- Chin-up (supinated grip)
- Neutral grip pull-up
- Hanging leg & knee raise
- L-sit hold
Posterior Chain
- Romanian deadlift (rack loaded)
- Rack pull (knee height)
- Good morning
- Barbell hip thrust (spotter arms)
- Barbell shrug
Accessory Work
- Barbell row (J-hooks loaded)
- Z-press (seated overhead)
- Landmine press (with attachment)
- Dips (with dip handle attachment)
- Band work (with band peg attachments)
Strength & Power
- Isometric mid-shin pull
- Paused squats & paused bench
- Block deadlifts (plates elevated)
- Reverse band squat & bench
- Heavy singles & max effort work
Technical Details
| Frame Steel | 75×75×3mm commercial-grade steel uprights |
| Total Height | 235cm |
| Outer Width | 119cm |
| Inner Width (usable) | 103cm |
| Base Depth | 150cm |
| Hole Spacing | 50mm, laser-cut with numbered positions |
| Pull-Up Station | Integrated multi-grip bar, wide, narrow and neutral grip |
| Included Safety | J-hooks (pair) and adjustable spotter arms (pair) |
| Base Style | Flat-foot freestanding, bolt-down holes included |
| Finish | Matte black powder coat, scratch, sweat and corrosion resistant |
| Attachment Compatibility | 75×75mm uprights, 28mm holes, compatible with modular rack attachments |
| Warranty | To confirm |
| Delivery | Australia-wide palletised freight, Sydney, Melbourne, Brisbane, Adelaide, Perth |
Weight Ratings at a Glance
| Component | Rated Capacity | Notes |
|---|---|---|
| J-Hooks | 500kg+ | Heavy squat, bench press and overhead press |
| Spotter Arms | 500kg+ | Full-width catch depth across inner rack space |
| Pull-Up Bar | 160kg | Multi-grip integrated overhead station |
| Frame Uprights | Commercial rated | 75×75×3mm, the same spec used in standalone commercial racks |
Pros & Cons
✓ Pros
- 75×75×3mm commercial steel frame, the same wall thickness used in standalone commercial racks
- 500kg+ rated J-hooks and spotter arms for serious strength training
- 235cm height accommodates tall lifters and overhead bar work comfortably
- Laser-cut numbered holes at 50mm spacing for fast, precise height adjustment
- Multi-grip pull-up station included as standard
- Flat-foot base offers freestanding stability without mandatory floor bolting
- Bolt-down holes included for permanent commercial installation
- Matte black powder coat resists scratches, sweat and corrosion
- On display at our Milperra Sydney showroom, inspect before you buy
✗ Cons
- Heavy freight unit, check delivery access and floor load for upper-level installations
- Requires 2.4m minimum ceiling height, check for fans, lights and overhead obstacles
- Assembly requires 2 people and around 2 to 3 hours for first-time assembly
- For kipping pull-ups and CrossFit-style use, floor bolting is strongly recommended
- Not suitable for outdoor or uncovered environments
The Right Rack For
- Serious home gym and garage gym liftersCommercial 75×75×3mm steel means this rack is built to outlast every program you run through it, in a footprint suited to a standard garage bay
- Powerlifters and strength athletes500kg+ rated J-hooks and spotter arms, laser-cut numbered holes for competition-height setup, and high rigidity under max effort attempts
- PT studios and small commercial facilitiesMulti-grip pull-up station, bolt-down capability and modular attachment compatibility cover a wide range of client lifting styles
- Anyone upgrading from a 50×50mm budget rackThe difference in rigidity and confidence under load is noticeable from the first heavy session
- School gyms, hotel fitness centres and institutional facilitiesCommercial-grade build suited to sustained daily multi-user heavy use
Who should not buy this: If you have a low ceiling under 2.4m, the Beast Power Rack's 235cm height will not fit comfortably. If you only need a basic squat stand for light accessory work, a smaller and lighter rack will suit your space and budget better. If you need a fully modular cable and pulley system in one unit rather than a dedicated rack, a functional trainer may be a better starting point.
See It in Sydney
Beast Power Rack On Display
10/202 Milperra Road, Milperra NSW 2214. Inspect the frame, load the J-hooks, feel the steel weight and compare with other rack models in person before purchasing.
📍 Get Directions
Showroom Hours
Monday to Friday, 9am to 5pm. Saturday by appointment only. Closed Sunday.
Our team is on-site for layout planning, ceiling height assessment and attachment configuration advice.
Sydney Metro Installation
Professional assembly available for Sydney customers. The rack is assembled, levelled and safety checked, ready to train the same day. Contact us to book after ordering.
Australia-Wide FreightTracked palletised heavy freight to Sydney, Melbourne, Brisbane, Adelaide, Perth and regional areas. Tail-lift delivery available for residential addresses.
Depot Pickup AvailableSydney (Milperra NSW), Melbourne (Derrimut) and Brisbane (Archerfield) depots. Contact us to arrange collection.
Professional InstallationSydney Metro installation available, train the same day. Contact us after ordering to book your assembly slot.
Frequently Bought Together
🏋️ Power Racks & Squat Racks →
⚫ Dumbbells & Racks →
🔩 Rack & Machine Attachments →
🟫 Rubber Gym Flooring →
Frequently Asked Questions
Common Questions
It refers to the upright steel tubing dimensions, 75mm wide × 75mm deep × 3mm wall thickness. Standard home gym racks use 50×50×2mm tubing. The Beast Power Rack's uprights have a noticeably larger cross-section and thicker wall. In practical terms, thicker walls resist deflection under eccentric loading, the force generated when a heavy barbell is lowered, caught by spotter arms, or racked unevenly. This is a key safety factor during heavy squats and bench press without a spotter. Thicker uprights also support heavier J-hook and attachment ratings, which is why the Beast Power Rack is rated at 500kg+.
The Beast Power Rack's flat-foot base design provides freestanding stability for standard barbell training, squats, bench press, overhead press and deadlifts, without floor anchoring. However, bolt-down holes are included in the upright feet for permanent installation. Floor bolting is strongly recommended for commercial environments, kipping pull-ups, heavy band-resisted work, or any training style that generates lateral or horizontal force on the frame. For Sydney Metro customers, our installation team can advise on the best anchoring method for your floor type.
The Beast Power Rack measures 119cm wide × 150cm deep × 235cm tall. For comfortable training with full barbell loading on both sides, allow a minimum 2.5m × 2.5m floor area. Standard Australian residential ceilings at 2.4m are sufficient, but check for overhead fans, light fittings and air conditioning units. A standard single-car garage bay (typically 2.8 to 3m wide) accommodates the rack width comfortably. Contact us with your exact room dimensions and our team will advise on the ideal placement.
The Beast Power Rack ships complete with:
- Pair of commercial J-hooks with barbell protection lining
- Pair of adjustable safety spotter arms
- Integrated multi-grip pull-up bar (wide, narrow and neutral grip)
- Full assembly hardware and instructions
Yes. The Beast Power Rack is built to commercial specification. The 75×75×3mm frame is the same upright standard used in purpose-built commercial power racks. The 500kg+ rated J-hooks and spotter arms support repeated heavy loading across multiple daily users. The matte black powder coat resists sweat, chalk and surface abrasion under commercial use conditions. The optional floor bolt-down capability supports full stability in high-traffic environments. For multi-unit commercial fitouts, contact us for volume pricing and delivery coordination.
Yes. The Beast Power Rack uses 75×75mm uprights with 28mm pin holes, a commercial standard that accepts a wide range of modular attachments. Compatible upgrades include dip handles, a landmine base, safety strap systems, band peg sets, plate storage pegs, chin-up ball grips and front foot extensions for additional stability. This modular compatibility means your rack can grow with your training without needing to replace the unit.
Assembly requires 2 people and approximately 2 to 3 hours following the included instructions. All components are labelled and the process is straightforward for anyone comfortable with flat-pack furniture assembly. For Sydney Metro customers, professional installation is available, our team assembles, levels and safety checks the rack ready to train the same day. Contact us after ordering to book. For interstate customers, detailed assembly instructions and pre-labelled components are included with every order.
Yes. The Beast Power Rack is on display at our Milperra Sydney showroom at 10/202 Milperra Road, Milperra NSW 2214. You can inspect the steel uprights, test the J-hook adjustment, feel the frame rigidity and compare it against other rack models we stock. Showroom hours are Monday to Friday, 9am to 5pm, and Saturday by appointment only. Our team is on-site to answer questions about ceiling height requirements, floor anchoring options and attachment compatibility for your specific setup.
It depends on what you need from a rack. Budget imported racks typically use 50×50×2mm steel and lighter-rated hardware, which is fine for casual lifting at lower weights. The Beast Power Rack's 75×75×3mm frame and 500kg+ rated J-hooks and spotter arms are built for lifters who train heavy, train often, or need a rack that will hold up under commercial multi-user conditions. If you are an occasional lifter working with lighter loads, a lighter rack may be a more cost-effective choice. If you train seriously or run a facility, the extra steel pays off in rigidity and longevity.
Warranty details for the Beast Power Rack are to be confirmed. Contact our team on 1300 247 888 or [email protected] and we will provide current warranty terms before you order.
The rack arrives flat-packed via palletised freight and requires assembly, which takes around 2 to 3 hours with 2 people following the included instructions. If you are in the Sydney Metro area, you can book our professional installation service so the rack arrives, is assembled, levelled and safety checked on the day, ready to train immediately. Interstate customers receive full assembly instructions and labelled hardware with every order.
The rack ships with everything needed to start training: J-hooks, spotter arms and the multi-grip pull-up bar. You will need your own Olympic barbell and weight plates, which are sold separately. Many customers also add a flat or adjustable bench for pressing work, and rubber gym flooring underneath the rack to protect both the floor and equipment. Browse our dumbbells and racks and rubber gym flooring ranges to complete your setup.
Beast Power Rack: Delivery Areas Australia
We deliver the Beast Power Rack Australia-wide, with regular freight to Sydney and across New South Wales including Parramatta, Bankstown, Liverpool, Penrith, Blacktown, Campbelltown, the Northern Beaches and Wollongong. We also service Melbourne and regional Victoria, Brisbane, the Gold Coast and Sunshine Coast in Queensland, Adelaide and South Australia, Perth and Western Australia, Canberra, Hobart and Darwin. Sydney Metro customers can also arrange professional installation, and depot pickup is available at our Milperra showroom.
We deliver the Beast Power Rack Australia-wide, with regular freight to Sydney and across New South Wales including Parramatta, Bankstown, Liverpool, Penrith, Blacktown, Campbelltown, the Northern Beaches and Wollongong. We also service Melbourne and regional Victoria, Brisbane, the Gold Coast and Sunshine Coast in Queensland, Adelaide and South Australia, Perth and Western Australia, Canberra, Hobart and Darwin. Sydney Metro customers can also arrange professional installation, and depot pickup is available at our Milperra showroom.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
In Stock, Sydney Warehouse
🏋️ On Display, Milperra Showroom
🔧 Sydney Metro Installation Available
🚚 Fast Australia-Wide Freight
Beast Power Rack Commercial 75×75×3mm Power Cage | 500kg+ Rated | Home Gym & PT Studio | Australia
The Beast Power Rack earns its name. Built from 75×75×3mm steel uprights, the same wall thickness used in standalone commercial gym machines and substantially heavier than the 50×50mm tubing found in most home gym racks, this is a power rack built for serious load. Standing 235cm tall with a 119cm outer width and 150cm deep flat-foot base, it is rated for 500kg+ across J-hooks and spotter arms and ships complete with a multi-grip pull-up station, J-hooks and safety spotter arms.
Whether you are building a garage gym, equipping a PT studio, or fitting out a commercial facility, the Beast Power Rack delivers the rigidity and safety margins serious lifting demands, backed by a matte black powder coat finish and available across Sydney, Melbourne, Brisbane, Adelaide and Perth.
500KG+Load Rating
75×75×3mmSteel Uprights
235CMTotal Height
50MMHole Spacing
Why 75×75×3mm Changes Everything
3×
More Steel
75×75×3mm uprights contain significantly more steel per metre than standard 50×50×2mm home rack tubing, the difference you feel the moment you load the bar
500KG+
Rated Capacity
J-hooks and spotter arms rated for 500kg+, handling heavy squats, bench press and overhead press without frame flex or rack movement
0
Wobble
The combination of 3mm wall thickness, flat-foot base design and crossbeam bracing minimises the rack movement that compromises safety and confidence under heavy load
What makes the Beast Power Rack different from budget power racks?
Standard home gym racks use 50×50×2mm steel tubing. The Beast Power Rack uses 75×75×3mm, a notably larger upright cross-section and thicker wall. This is not a cosmetic upgrade: thicker tube walls resist deflection under eccentric loading, which is a critical safety factor when failing a heavy squat or bench press without a spotter. The laser-cut numbered holes at 50mm spacing support precise, repeatable J-hook positioning rather than the guesswork common to cheaper racks.
Dimensions at a Glance
Standard home gym racks use 50×50×2mm steel tubing. The Beast Power Rack uses 75×75×3mm, a notably larger upright cross-section and thicker wall. This is not a cosmetic upgrade: thicker tube walls resist deflection under eccentric loading, which is a critical safety factor when failing a heavy squat or bench press without a spotter. The laser-cut numbered holes at 50mm spacing support precise, repeatable J-hook positioning rather than the guesswork common to cheaper racks.
Know Your Footprint
235cmTotal Height
119cmOuter Width
103cmInner Width
150cmBase Depth
Recommended space: Allow a minimum 2.5m × 2.5m floor area for safe training access and barbell loading on both sides. Minimum ceiling height of 2.4m, which standard Australian residential ceilings comfortably meet. Contact our team for layout advice before ordering.
Key FeaturesCommercial Grade From Base to Bar
75×75×3mm Commercial Steel Uprights3mm wall thickness throughout, the same specification used in standalone commercial power racks. Provides high rigidity under heavy compound loads.
Laser-Cut Numbered Holes, 50mm SpacingPrecision laser-cut height positions with numbered markings for fast, repeatable J-hook and spotter arm adjustments, no guesswork between sets or training partners.
Multi-Grip Pull-Up StationIntegrated overhead pull-up bar with wide, narrow and neutral grip positions, covering lat pulldowns, chin-ups, hanging core work and upper-body mobility drills.
Heavy-Duty J-Hooks & Spotter ArmsRated for 500kg+ loads. J-hook cradle design with protective lining guards your barbell's knurling. Spotter arms catch failed reps safely across the full rack depth.
Flat-Foot Self-Stabilising BaseA wide 150cm deep flat-foot base provides freestanding stability without bolting to the floor, a key benefit for garage gyms, rented spaces and PT studios.
Floor Bolt-Down ReadyUpright feet include bolt holes for permanent floor anchoring, recommended for commercial environments, kipping pull-up work and heavy CrossFit-style training.
Matte Black Powder Coat FinishA scratch, sweat and corrosion-resistant finish built to withstand daily multi-user commercial gym use without chipping, fading or surface degradation.
Modular Attachment Compatibility75×75mm uprights with 28mm holes accept a full range of rack attachments, dip handles, landmine, band pegs, plate storage and more to expand training capability over time.
Full Exercise Library
Squat Variations
- Barbell back squat (high & low bar)
- Front squat
- Box squat
- Pause squat
- Rack pull (partial deadlift)
Pressing Movements
- Barbell bench press (flat, incline)
- Overhead barbell press (standing & seated)
- Close grip bench press
- Floor press
- Pin press
Pull-Up Station
- Wide grip pull-up
- Chin-up (supinated grip)
- Neutral grip pull-up
- Hanging leg & knee raise
- L-sit hold
Posterior Chain
- Romanian deadlift (rack loaded)
- Rack pull (knee height)
- Good morning
- Barbell hip thrust (spotter arms)
- Barbell shrug
Accessory Work
- Barbell row (J-hooks loaded)
- Z-press (seated overhead)
- Landmine press (with attachment)
- Dips (with dip handle attachment)
- Band work (with band peg attachments)
Strength & Power
- Isometric mid-shin pull
- Paused squats & paused bench
- Block deadlifts (plates elevated)
- Reverse band squat & bench
- Heavy singles & max effort work
Technical Details
| Frame Steel | 75×75×3mm commercial-grade steel uprights |
| Total Height | 235cm |
| Outer Width | 119cm |
| Inner Width (usable) | 103cm |
| Base Depth | 150cm |
| Hole Spacing | 50mm, laser-cut with numbered positions |
| Pull-Up Station | Integrated multi-grip bar, wide, narrow and neutral grip |
| Included Safety | J-hooks (pair) and adjustable spotter arms (pair) |
| Base Style | Flat-foot freestanding, bolt-down holes included |
| Finish | Matte black powder coat, scratch, sweat and corrosion resistant |
| Attachment Compatibility | 75×75mm uprights, 28mm holes, compatible with modular rack attachments |
| Warranty | To confirm |
| Delivery | Australia-wide palletised freight, Sydney, Melbourne, Brisbane, Adelaide, Perth |
Weight Ratings at a Glance
| Component | Rated Capacity | Notes |
|---|---|---|
| J-Hooks | 500kg+ | Heavy squat, bench press and overhead press |
| Spotter Arms | 500kg+ | Full-width catch depth across inner rack space |
| Pull-Up Bar | 160kg | Multi-grip integrated overhead station |
| Frame Uprights | Commercial rated | 75×75×3mm, the same spec used in standalone commercial racks |
Pros & Cons
✓ Pros
- 75×75×3mm commercial steel frame, the same wall thickness used in standalone commercial racks
- 500kg+ rated J-hooks and spotter arms for serious strength training
- 235cm height accommodates tall lifters and overhead bar work comfortably
- Laser-cut numbered holes at 50mm spacing for fast, precise height adjustment
- Multi-grip pull-up station included as standard
- Flat-foot base offers freestanding stability without mandatory floor bolting
- Bolt-down holes included for permanent commercial installation
- Matte black powder coat resists scratches, sweat and corrosion
- On display at our Milperra Sydney showroom, inspect before you buy
✗ Cons
- Heavy freight unit, check delivery access and floor load for upper-level installations
- Requires 2.4m minimum ceiling height, check for fans, lights and overhead obstacles
- Assembly requires 2 people and around 2 to 3 hours for first-time assembly
- For kipping pull-ups and CrossFit-style use, floor bolting is strongly recommended
- Not suitable for outdoor or uncovered environments
The Right Rack For
- Serious home gym and garage gym liftersCommercial 75×75×3mm steel means this rack is built to outlast every program you run through it, in a footprint suited to a standard garage bay
- Powerlifters and strength athletes500kg+ rated J-hooks and spotter arms, laser-cut numbered holes for competition-height setup, and high rigidity under max effort attempts
- PT studios and small commercial facilitiesMulti-grip pull-up station, bolt-down capability and modular attachment compatibility cover a wide range of client lifting styles
- Anyone upgrading from a 50×50mm budget rackThe difference in rigidity and confidence under load is noticeable from the first heavy session
- School gyms, hotel fitness centres and institutional facilitiesCommercial-grade build suited to sustained daily multi-user heavy use
Who should not buy this: If you have a low ceiling under 2.4m, the Beast Power Rack's 235cm height will not fit comfortably. If you only need a basic squat stand for light accessory work, a smaller and lighter rack will suit your space and budget better. If you need a fully modular cable and pulley system in one unit rather than a dedicated rack, a functional trainer may be a better starting point.
See It in Sydney
Beast Power Rack On Display
10/202 Milperra Road, Milperra NSW 2214. Inspect the frame, load the J-hooks, feel the steel weight and compare with other rack models in person before purchasing.
📍 Get Directions
Showroom Hours
Monday to Friday, 9am to 5pm. Saturday by appointment only. Closed Sunday.
Our team is on-site for layout planning, ceiling height assessment and attachment configuration advice.
Sydney Metro Installation
Professional assembly available for Sydney customers. The rack is assembled, levelled and safety checked, ready to train the same day. Contact us to book after ordering.
Australia-Wide FreightTracked palletised heavy freight to Sydney, Melbourne, Brisbane, Adelaide, Perth and regional areas. Tail-lift delivery available for residential addresses.
Depot Pickup AvailableSydney (Milperra NSW), Melbourne (Derrimut) and Brisbane (Archerfield) depots. Contact us to arrange collection.
Professional InstallationSydney Metro installation available, train the same day. Contact us after ordering to book your assembly slot.
Frequently Bought Together
🏋️ Power Racks & Squat Racks →
⚫ Dumbbells & Racks →
🔩 Rack & Machine Attachments →
🟫 Rubber Gym Flooring →
Frequently Asked Questions
Common Questions
It refers to the upright steel tubing dimensions, 75mm wide × 75mm deep × 3mm wall thickness. Standard home gym racks use 50×50×2mm tubing. The Beast Power Rack's uprights have a noticeably larger cross-section and thicker wall. In practical terms, thicker walls resist deflection under eccentric loading, the force generated when a heavy barbell is lowered, caught by spotter arms, or racked unevenly. This is a key safety factor during heavy squats and bench press without a spotter. Thicker uprights also support heavier J-hook and attachment ratings, which is why the Beast Power Rack is rated at 500kg+.
The Beast Power Rack's flat-foot base design provides freestanding stability for standard barbell training, squats, bench press, overhead press and deadlifts, without floor anchoring. However, bolt-down holes are included in the upright feet for permanent installation. Floor bolting is strongly recommended for commercial environments, kipping pull-ups, heavy band-resisted work, or any training style that generates lateral or horizontal force on the frame. For Sydney Metro customers, our installation team can advise on the best anchoring method for your floor type.
The Beast Power Rack measures 119cm wide × 150cm deep × 235cm tall. For comfortable training with full barbell loading on both sides, allow a minimum 2.5m × 2.5m floor area. Standard Australian residential ceilings at 2.4m are sufficient, but check for overhead fans, light fittings and air conditioning units. A standard single-car garage bay (typically 2.8 to 3m wide) accommodates the rack width comfortably. Contact us with your exact room dimensions and our team will advise on the ideal placement.
The Beast Power Rack ships complete with:
- Pair of commercial J-hooks with barbell protection lining
- Pair of adjustable safety spotter arms
- Integrated multi-grip pull-up bar (wide, narrow and neutral grip)
- Full assembly hardware and instructions
Yes. The Beast Power Rack is built to commercial specification. The 75×75×3mm frame is the same upright standard used in purpose-built commercial power racks. The 500kg+ rated J-hooks and spotter arms support repeated heavy loading across multiple daily users. The matte black powder coat resists sweat, chalk and surface abrasion under commercial use conditions. The optional floor bolt-down capability supports full stability in high-traffic environments. For multi-unit commercial fitouts, contact us for volume pricing and delivery coordination.
Yes. The Beast Power Rack uses 75×75mm uprights with 28mm pin holes, a commercial standard that accepts a wide range of modular attachments. Compatible upgrades include dip handles, a landmine base, safety strap systems, band peg sets, plate storage pegs, chin-up ball grips and front foot extensions for additional stability. This modular compatibility means your rack can grow with your training without needing to replace the unit.
Assembly requires 2 people and approximately 2 to 3 hours following the included instructions. All components are labelled and the process is straightforward for anyone comfortable with flat-pack furniture assembly. For Sydney Metro customers, professional installation is available, our team assembles, levels and safety checks the rack ready to train the same day. Contact us after ordering to book. For interstate customers, detailed assembly instructions and pre-labelled components are included with every order.
Yes. The Beast Power Rack is on display at our Milperra Sydney showroom at 10/202 Milperra Road, Milperra NSW 2214. You can inspect the steel uprights, test the J-hook adjustment, feel the frame rigidity and compare it against other rack models we stock. Showroom hours are Monday to Friday, 9am to 5pm, and Saturday by appointment only. Our team is on-site to answer questions about ceiling height requirements, floor anchoring options and attachment compatibility for your specific setup.
It depends on what you need from a rack. Budget imported racks typically use 50×50×2mm steel and lighter-rated hardware, which is fine for casual lifting at lower weights. The Beast Power Rack's 75×75×3mm frame and 500kg+ rated J-hooks and spotter arms are built for lifters who train heavy, train often, or need a rack that will hold up under commercial multi-user conditions. If you are an occasional lifter working with lighter loads, a lighter rack may be a more cost-effective choice. If you train seriously or run a facility, the extra steel pays off in rigidity and longevity.
Warranty details for the Beast Power Rack are to be confirmed. Contact our team on 1300 247 888 or [email protected] and we will provide current warranty terms before you order.
The rack arrives flat-packed via palletised freight and requires assembly, which takes around 2 to 3 hours with 2 people following the included instructions. If you are in the Sydney Metro area, you can book our professional installation service so the rack arrives, is assembled, levelled and safety checked on the day, ready to train immediately. Interstate customers receive full assembly instructions and labelled hardware with every order.
The rack ships with everything needed to start training: J-hooks, spotter arms and the multi-grip pull-up bar. You will need your own Olympic barbell and weight plates, which are sold separately. Many customers also add a flat or adjustable bench for pressing work, and rubber gym flooring underneath the rack to protect both the floor and equipment. Browse our dumbbells and racks and rubber gym flooring ranges to complete your setup.
Beast Power Rack: Delivery Areas Australia
We deliver the Beast Power Rack Australia-wide, with regular freight to Sydney and across New South Wales including Parramatta, Bankstown, Liverpool, Penrith, Blacktown, Campbelltown, the Northern Beaches and Wollongong. We also service Melbourne and regional Victoria, Brisbane, the Gold Coast and Sunshine Coast in Queensland, Adelaide and South Australia, Perth and Western Australia, Canberra, Hobart and Darwin. Sydney Metro customers can also arrange professional installation, and depot pickup is available at our Milperra showroom.
We deliver the Beast Power Rack Australia-wide, with regular freight to Sydney and across New South Wales including Parramatta, Bankstown, Liverpool, Penrith, Blacktown, Campbelltown, the Northern Beaches and Wollongong. We also service Melbourne and regional Victoria, Brisbane, the Gold Coast and Sunshine Coast in Queensland, Adelaide and South Australia, Perth and Western Australia, Canberra, Hobart and Darwin. Sydney Metro customers can also arrange professional installation, and depot pickup is available at our Milperra showroom.
